Robot pets

These are my robot pets I made out of duck tape and metal nails and bolts.

this one is my chick and we decided it's name is peep. :)

 This is my favorite Herby the hermit-crab.

 This is Silvia the mouse.

 And this is Gary the gerbil.

 The ladybug is Nemo and the rolly polly is Tuck.

 This is max the tarantula.

And last is Timmy the turtle.

Blender

Here are all the pieces you need:

• 1 4X4 platform
• 1 glass case brick like in the photo
• 3 green 1X1 stud 
• 1 1X1 red stud
• 1 1X1glowing orange stud
• 2 black 2X2 round platforms
• 1 1X2 black platform
• 1 1X2 black platform with bar coming up the side
• 1 black lever
• 1 black 1X2slope with bars in middle
• 1 2X2 black platform
• 1 2X2 black axle 2X2 platform 
• 1 2X2 round black brick

Step one:

Connect  the 4X4 platform with the 2X2 black axle on the middle of the bottom then on that add the 2X2 platform, then add the 2X2 round black brick on that like the photo shows.

Step two:

Connect the 2X2 black round platform in the middle of the top of the 4X4 platform. On top add the 1 1X2 platform on top right next to it add the other 1X2 platform with the bar out of the side.

Step Three:

Next add the 1X2 slop piece on top next to it add the 1X1 orange stud next to that add the lever.

Step four:

Finally add the glass case brick upside down like in the picture add all the studs in but if the do not fit take one out then add the last 2X2 round platform on top and you are finished.

Picnic Table

 Here are the pieces for the LEGO picnic table:

• 1 Lego mug
• 1 Lego plate
• 3 Lego chicken wings
• 1 Lego turkey
• 2 Lego 2X8 platforms
• 2 2X3 platforms
• 2 1X6 platforms
• 2 2X2 Lego bricks
• 2 2X2 ramps 
• 1 2X10 platform
• 1 8X8 platform
• 1 1X1 gold brick (the color does not matter)
• and one mini-figure

 Step 1:

Connect the 2X10 platform with the 1 2X2 ramp, right next to that add the 2X2 brick as the picture shows then add the other 2X2 ramp next to it.

 Step 2:

Next add the 2X8 platform right next to the 2X10 platform and connect it with a 2X3 platform like the pic shows, do it on the opposite side then add the 1X6 platform just like the photo.

Step Three:

Now add the 8X8 platform on top of the 2X2 brick like the photo shows.

Step Four:

To add on the turkey you need to add the 1X1 gold brick under it, then put the mini-figure down on the bench place the plate and mug in front of him, then all you need to do is add the turkey in his hand so it looks like he is eating and you are done.

The Jet Pack

 

Here is project #1-- the Jet Pack 

Here are the parts: 

•  2 Lego levers
• 2 1X2 gray platforms with one stud on top
• 2 orange 1X1 flat studs
• 2 1X2 gray Lego platforms with bars on the sides
• 2 1X1gray Lego studs
• 2 1X1 orange studs
• 2 Lego flames
• 1 1X1black or gray lego platform
• 2 1X1 gray Lego bricks with studs on the side
• 2 minifigure  robot/skeleton arms
• 1 minifigure of your choice :)

 

Step One: 

Connect the 1X2 platform with bars on the side with the 2 1X1 gray studs. Connect the orange 1X1 stud on the 2 gray studs like the picture shows.

Step Two:

Connect the 2 1X1 bricks with the stud on the side on top of the 1X2 platform with bars on side.  Connect the 1X2 platform like the picture shows.

 Step three:

Connect the 1x2 platform with bars on the side of the 1X2 Lego platform. Connect the two flat orange 1X1 studs.

 Step Four:

Place the 2 1X2 platform with one stud on top of the 1X1 brick with stud on the side as the picture shows add the levers on them.

 Step Five:

Place the 2 robot arms on the bars on the side place the fire in the hands and add your minifigure, you have a new jet pack.

Welcome!

I am making this blog so that people who are stuck at home with nothing to do can hop on the computer and start building.With step by step instructions it is easy to start building.